During the anaerobic digestion,
bio-gas is generated that is usually utilized by gas engines,
incinerators, boilers or other devices requiring regular and consistent
gas supply. For this purpose adequately sized bio-gas handling system is
critical between the gas producing units and the utility point. We offer
a comprehensive range of devices for the bio-gas handling system for
this purpose.
Types of Products
¤ Gas Holder
Gas
Holder is essentially a floating cover provided with an extended rim
that is sufficiently submerged into the water level. It is done so that
even in the maximum lift position of the floating cover the rim still
remains below the top water level. The Gas Holder covers will be
provided in two systems i.e. with vertical guided system or spiral
guided system. The rollers are attached with the Gas Holder covers in
both the cases around its fringe to ensure that the cover is adequately
balanced during lift position and is not tilted unduly under wind load
conditions. Properly sized structure ensures roller guidance above the
gas holder tank area. The Gas Holder tanks can be provided upto 110'
diameter & above. Gas Holders are also available with engineered
flexible membrane which is seal tight to the tank wall.
¤ Gas Safety Equipment
We provide a wide range of Gas Safety equipment for installation in
bio-gas handling systems. These include Pressure Relief Valve, Flame
Trap, Flame Cell, Check Valve, Drip / Sediment Trap, Gas Burner etc.
)
